Final Connections

Mounting/Testing Test Board 1 || Mounting/Testing Board 2 || Adjustments || Tuning the Receiver

See Making Loops for Connections on the Boards for making easy connections to the board for testing and completing the board.

____Connect the 75 ohm coax that comes from XTAL FILTER OUT on Board 1 and connect it to XTAL FILTER IN on Board 2. Picture
____Connect the 12 Volt BOLD squares and the Ground on Board 1 to the 12 Volt BOLD squares on Board 2. Picture
____Connect the 12 Volt BOLD squares and the Ground on Board 1 to the connector for 12 volts on the bottom plate. (Connector not provided in the kit)
____Connect the Antenna BOLD square on Board 1 to the Antenna connector on the bottom plate. A connector can also be soldered to the ground plane next to the Antenna connecton. Picture (Connector not provided in the kit)
____Connect the Speaker BOLD Square on Board 2 to the Speaker connector on the bottom plate. A connector can also be soldered to the back of Board 2 on the ground plane. Picture (Connector not provided in the kit)

Picture of Back of Completed Receiver showing the above connections.

Adjustments

Send E-Mail || Amateur Radio Receivers || Electroluminescent Receiver || Back to Construction of the Kit || Back to Ham Radio Instructions for the Kit

Last Update: 10/6/04
Web Author: David White, WN5Y